Powerdynamo VAPE Ignition Sys Stator for Can Am 250 M18 Nut Rotax 281 282 366 DC

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.

Fits Can Am
1973-87 250 Rotax Large Taper
Fits Can Am
Rotax 244, 280, 281, 282, 366, 406
Large Taper Crank
M18 Nut
This kit uses a flywheel that fits a 18mm crankshaft.
Fits Aprilia 1984 240 RX

Rotor weight 1215g
12 Volt / 100 Watt

We have found in some cases, some of these Can Am Models use 771179900, this comes with a 16mm flywheel.
A past customer with a 1978 Can Am MX4 250 that used the 16mm flywheel.

This is the D/C system and will run head lights, tail lights, turn signals and charges the battery.
If the DC systems has R9522 regulator, then a battery is needed to flash the turn signals / lights
If the DC systems has R7300 regulator, then no battery is needed to flash the turn signals / lights

This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, Rotor Puller & hardware.

THIS PICTURE IS NOT AN ACCURATE REPRESENTATION OF THIS EXACT APPLICATION.

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Ossa, Sachs, Zundapp, and small, medium and large shaft Husqvarna engines.

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! And remember to change those 6 Volt bulbs with 12 volt bulbs!

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.