Powerdynamo Ignitions

Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC

(No reviews yet) Write a Review
SKU:
72 69 799 DC-2
MPN:
72 69 799 DC-2
Condition:
New
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
  • Powerdynamo VAPE Ignition Stator for Bultaco El Bandido 360 El Tigre 49oz18mm DC
$499.99

Description

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.
Fits Bultaco
1973-74 Alpina 125 175
1971-79 Alpina 250
1973-79 Alpina 350
1961-62 Campera 125
1966-72 Campera 175
1968-69 El Bandido 360 4 Speed
1968-71 El Montader 360
El Tigre
1975-79 Frontera 250
1975-76 Frontera 360
1976-78 Frontera 370
1973-76 Lobito 75
1970-76 Lobito 125
1971-76 Lobito 175
1967-73 Matador 250
1975-78 Matador 350
1960-66 Mercurio 125
1963-66 1974-76 Mercurio 155
1964-68 Mercurio 175
1966-68 Mercurio 200
1962-79 Metralla 250
1975 Metralla 250 GT
1976-78 Sherpa T125
1968-78 Sherpa T250
1972-80 Sherpa T350
1963 TSS 125 Air cooled
1963 TSS 175 Air cooled
1963 TSS 200 Air cooled

1.4kg/49oz Flywheel
Single Spark
Crankshaft Nut 18mm M18x1.5
12 Volt / 100 Watt

This is the D/C system and will run head lights, tail lights, turn signals and charges the battery.
If the DC systems has R9522 regulator, then a battery is needed to flash the turn signals / lights
If the DC systems has R7300 regulator, then no battery is needed to flash the turn signals / lights

This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, Rotor Puller & hardware.

THIS PICTURE IS NOT AN ACCURATE REPRESENTATION OF THIS EXACT APPLICATION.

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Ossa, Sachs, Zundapp, and small, medium and large shaft Husqvarna engines.

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! And remember to change those 6 Volt bulbs with 12 volt bulbs!

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.
View AllClose