Powerdynamo MZB VAPE Ignition System Stator for All Yamaha YZ IT 465 490 49oz DC

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.
In some cases the coil and regulator mounting may have to be improvised.

Fits Yamaha
IT425, IT/ YZ 465 490, All Years
1992-93 WR500Z
Base plate diameter 110mm, mounted with 2 screws.
Original rotor has the big end diameter 19,7mm
The crankshaft should have M12 thread.
The rotor weight 1.4kg
Magnetic generator with integrated fully electronic ignition. Light output 12 Volt /180 Watt DC. Replaces the original flywheel magnet system. Sets without modification to the motor housing on the original bracket of the Lima. Ignition impulse is effected fully electronically and without contact.

This is the D/C system and will run head lights, tail lights, turn signals and charges the battery.
If the DC systems has R9522 regulator, then a battery is needed to flash the turn signals / lights
If the DC systems has R7300 regulator, then no battery is needed to flash the turn signals / lights

This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, Rotor Puller & hardware.

THIS PICTURE IS NOT AN ACCURATE REPRESENTATION OF THIS EXACT APPLICATION.

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Ossa, Sachs, Zundapp, and small, medium and large shaft Husqvarna engines.

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! And remember to change those 6 Volt bulbs with 12 volt bulbs!

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.