MotoBatt AGM Battery 2003-12 fits KTM 990 Supermoto Adventure Super Duke Enduro

MotoBatt AGM Sealed Battery
Replaces: YTX9BS YT12ABS YTZ12S YTZ14S
Voltage 12
CCA 160
12V VRLA HiCapacity Starting Battery
Absorbed Glass Mat (AGM) Technology & Design
Brass Terminals-superior conductivity
US DOT, IATA certified non-spillable
Highest AH Capacity in the industry
Factory Activated-Ready to Install
MotoBatt being a premium AGM battery is superior by design. AGM batteries have been used in demanding military & offroad applications for many years. The sealed, glass mat design has many longevity & reliability based benefits.
Each plate is wrapped in a fibrous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate & cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in MotoBatt designs really make the difference here.
AGM batteries also have a much lower inherent self-discharge rate than wet flooded types. As a higher amp hour AGM battery, the MotoBatt battery can also discharge more deeply & recover repeatedly under vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling, without pre-mature failure.
Your Motobatt is a Factory Activated battery. Comes to you pre-conditioned & fully charged for optimum Performance & ready to install out of the box. 80% of early PowerSport battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess w/ acid or top up fluid levels or remove corrosion from the terminals caused by gassing; common w/ standard flooded battery types.
KTM
09-12 RC8 1090
03-12 Adventure, Super Duke 990
09-12 Supermoto 990
09-11 Super Enduro 950
99-02 Adventurer, Duke, RXC LC4 Super Moto 640
96-98 Adventure, Duke, LC4 620; LC4 E/XC 400
96-01 RXC LC4 400